delim
delim
delim
ツールとメンテナンスキット

ツールとメンテナンスキット

Products

Dynamic Duo (Restek Leak Detector and ProFLOW 6000 Flowmeter)

Protect your instrument and improve data quality with this powerful pair from Restek. Checking for leaks and verifying flows before you start running help you avoid costly problems later.

製品情報を見る

Restek リークディテクタ

わずかなリークでも、カラムのダメージにつながります。Restekのリークディテクタでカラムの劣化を未然に防ぎましょう。

  • リークの状態を音でお知らせします
  • 完全充電後12時間稼働できます
  • 幅広いガスを検知できます

製品情報を見る

Restek ProFLOW 6000 Electronic Flowmeter

Flowmeters that can measure flammable gases are becoming mandatory due to the increased use of hydrogen in chromatography. With its Ex rating, the Restek ProFLOW 6000 meter is designed specifically with explosive and flammable gases in mind.

製品情報を見る

Oven Shrouds

Agilent 6890/7890 GC用

  • Includes heating coil and oven temperature sensor.
  • Available in 120 V and 220 V units.

製品情報を見る

Hi-Duty Tubing Cutter

  • Specifically designed to cut 1/8" to 1-1/8" (4 mm to 28 mm) OD tubing.
  • Easily cuts stainless steel, Monel alloy, and other hard-temper materials.
  • Unique design makes clean, right-angle cuts and eliminates spiraling.
  • Integral reamer folds away for safety and convenience.
  • Replacement cutter wheels also available.

製品情報を見る

FID Maintenance Kits

Agilent GC用

  • Include the most common consumable GC supplies and tools.
  • All parts meet or exceed performance of instrument manufacturer's parts.
  • Parts list makes reordering easy.

製品情報を見る

GC-MS Cleaning Kit

Poor sensitivity, loss of sensitivity at high masses, or high multiplier gain during an auto tune are all indicators that your mass spectrometer source may need to be cleaned. Restek has assembled all of the necessary components for cleaning and polishing your ion source.

製品情報を見る

Oven Flapper Assemblies

Agilent 5890/6890 GC用

  • Ensure even and consistent column heating when the insulation becomes damaged or worn.
  • Replacement Insulation Gasket and Hardware Kit includes the insulation gasket, 2 screws and 2 nuts.
  • Meets or exceeds original manufacturer's performance.
  • Insulation is replaceable, using Restek's Oven Flapper Assemblies.

製品情報を見る

Make Life Easier (MLE) Capillary Tool Kit

for PerkinElmer GCs

Everything you need in one complete kit!

製品情報を見る

Make Life Easier (MLE) Capillary Tool Kit

for Bruker/Varian GCs

Everything you need in one complete kit!

製品情報を見る

Make Life Easier (MLE) Capillary Tool Kit

for Thermo Scientific GCs

Everything you need in one complete kit!

製品情報を見る

Make Life Easier (MLE) Capillary Tool Kit

島津GC用

Everything you need in one complete kit!

製品情報を見る

Make Life Easier (MLE) Capillary Tool Kit

Agilent GC用

Everything you need in one complete kit!

製品情報を見る

12-Piece, Ball-Point Hex Key Set

Includes twelve hex keys (Allen wrenches): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", and 5/16".

製品情報を見る

Flashlight

This high-power, 170-lumen LED light features a rotating magnetic clip that attaches securely to give you convenient, hands-free lighting in almost any location. The reinforced plastic body design is water- and impact-resistant, making it reliable and virtually indestructible.

製品情報を見る

Metric 9-Piece, Ball-Point Hex Key Set

Includes nine metric hex keys (Allen wrenches): 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm.

製品情報を見る

Metric Wrench Set

High-quality 6 x 7 mm, 8 x 10 mm, and 16 x 17 mm wrenches for tightening a wide variety of fittings.

製品情報を見る

Open-End Wrench Set

for use with Shimadzu 17A, 2010, and 2014 Capillary Installation Gauge

Gap Inspection Gauge

  • Confirm that fittings are sufficiently tightened.
  • For use with 1/4", 3/8", 1/2" Swagelok fittings.
  • For Swagelok fittings in new installations only.

製品情報を見る

Tee Wrench

  • Hold 1/4" or 6 mm tee or cross fittings secure in multiple orientations during installation.
  • Fits easily in tool box, pouch, or belt.
  • Cushioned vinyl grip with generous gripping area.
  • For Swagelok fittings only.

製品情報を見る

Swaging Tool

  • Preswage compression fittings for easy installation.
  • Ideal for installations in tight areas.
  • For use with 1/4" Swagelok fittings only.

製品情報を見る

Flexible Inspection Light

  • Inspect inside surfaces of sample cylinders or other chambers.
  • 14" reach.
  • 100,000-hour LED life.

製品情報を見る

ResTape PTFE Tape

  • For threaded connections in a wide range of plumbing materials.
  • Each roll is 1/2" x 260".
  • Maximum temperature: 260 °C.

製品情報を見る

Torx Screwdriver Set

  • Set includes TR-10, TR-15, and TR-20.
  • Ideal for performing routine maintenance on Agilent 6890 and 7890 GCs.

製品情報を見る

GC Oven Thermometer

  • Verify GC oven temperature.
  • Quick measurements via sensor in the measuring tip.
  • Swivel head can turn 180°.
  • Wide measuring range: -50 °C to +350 °C.

製品情報を見る

SSI TC-20 Tube Cutting Machine

  • Cuts 1/16", 1/8", or 1/4" tubing with inside diameter as small as 0.008".
  • Electrically operated bench-top model.
  • Handy 1/16" dressing tool (included) on the swing arm removes burrs and reams tubing.
  • Voltage selectable 110120/220240 volts, 5060 Hz.*

製品情報を見る

Rethreading Tool

  • Repair worn or damaged threads.
  • Multiple uses (fittings, injectors, detectors, etc.)
  • Built-in guide to prevent cross threading.

製品情報を見る

1/4-Inch Nut Driver

  • Ideal for changing Agilent 5890/6890/6850 FID jets.
  • Securely grips jet for easy removal or installation.

製品情報を見る

GC Installation Kit

This kit contains the tubing and fittings needed to add an additional GC to your lab bench. Kit includes: tubing cutter, one 1/8-inch x 1/4-inch reamer, one 1/4-inch x 1/8-inch brass tube end reducer, one 7/16-inch wrench, one 1/2-inch wrench, four 1/8-inch brass tees, ten 1/8-inch brass nuts, ten brass front and back ferrules, and 50 feet (15.2 meters) of our instrument-grade cleaned 1/8-inch copper tubing.

製品情報を見る

Wrench Set

Includes 4-inch, 6-inch, and 8-inch adjustable wrenches.

製品情報を見る

5-in-1 Magnetic Screwdriver

Magnetic power tip holds bits and screws securely.

製品情報を見る

Plier Set

Includes 6-inch nose/side cutter, 6-inch wire cutter, and 6-inch adjusting pliers.

製品情報を見る

54-Piece Tool Kit

Set comes with screwdrivers, pliers, wrenches, sockets, scissors, clamps, and more. Durable, zippered, notebook-style carrying case for easy transport.

製品情報を見る

1/16-Inch Tubing Cutting Pliers

  • Ideal for cutting 1/16-inch tubing.
  • Cuts quickly, reducing distortion.
  • Perfect for quick cuts for non-critical applications or in "hard to get at" places.
  • After cutting, it is recommended that the dressing tool, cat.# 20188, be used to remove any burrs and to ream the tubing to a uniform shape.

製品情報を見る

Tubing Bender

  • Bends 1/8-inch, 3/16-inch, or 1/4-inch tubing.
  • Assists in making accurate left-hand, right-hand, or offset bends.

製品情報を見る

Tubing Reamer

  • Removes burrs from stainless steel tubing.
  • For 1/4- or 1/8-inch tubing.
  • Nonslip safety design.

製品情報を見る

Ridgid Tubing Cutter

  • Excellent for cutting 1/8- or 1/4-inch metal tubing.*
  • Compact size is ideal for tight spaces.
  • Replaceable cutting wheel.

製品情報を見る

1/16-Inch Tubing Cutter

  • Produces square, smooth cuts in 1/16-inch tubing.
  • Eliminates tubing distortion.
  • Cuts hard or soft copper, aluminum, brass, stainless steel, Monel alloy, or titanium.
  • Replaceable cutting wheel.

製品情報を見る

Universal Cylinder Wrench

Use this versatile wrench for tightening gauges and gas regulator CGA fittings to cylinder outlets and pipe thread connections.

製品情報を見る

Cylinder Valve Wrench

This specially designed wrench enables easy opening of cylinder valves that are fitted with a hand wheel. It is also suitable for removing difficult cylinder caps.

製品情報を見る

Replacement Cables

for Agilent GCs, Integrators, & Autosamplers

Connect an Agilent 5890 GC to remote-start another piece of equipment or to start the Agilent 5890 GC from that piece of equipment.

製品情報を見る

Replacement Cables

for Agilent GCs, Integrators, & Autosamplers

Connect an Agilent 5890 GC to a non-Agilent integrator or standard strip chart recorder.

製品情報を見る

GCオーブン冷却用ダイバーター

Agilent GC用

  • Divert GC exhaust heat up and away from the lab bench.
  • Meets or exceeds original manufacturer's performance.
  • Easy to installno tools required.
  • Compatible with 4" flexible metal dryer hose.

製品情報を見る

FID/Injector Cleaning Kit

Use Restek’s Cleaning Kit with ANY injection port!

製品情報を見る

FastPack Inlet Kits

for Agilent GCs

  • Convenient: all the parts you need in one packageno hunting for individual items.
  • Economical: costs less than the sum of the individual parts.
  • Clean: Mylar bag is factory sealed; no contamination of the products from weeks in the lab.

製品情報を見る

Ferrule Removal Kit

The tapered tools in this kit have teeth designed to grip and remove fused silica adaptor ferrules that have become stuck in the fitting detail. Each kit has two tools: one for removing 1/32-inch adaptor ferrules and one for removing 1/16-inch adaptor ferrules.

製品情報を見る

1/4-Inch3/16-Inch Open-End Wrenches

High-quality miniature wrenches to use with MXT low-dead-volume connectors.

製品情報を見る

Open-End Wrench Set

High-quality 1/4" x 5/16", 3/8" x 7/16", 7/16" x 1/2", and 1/2" x 9/16" wrenches for tightening a wide variety of chromatography fittings.

製品情報を見る

Nylon Tube Brushes and Pipe Cleaner

Use to remove small septum fragments and residue from dirty glass inlet liners. Brushes are 1/8-, 3/16-, and 1/4-inch in diameter; pipe cleaner is one foot (30 cm) long.

製品情報を見る

Stainless Steel Tube Brushes/Surface Brush

Unlike brass brushes that can leave a metal residue, these stainless steel tube brushes (3/8-, 3/16-, and 1/4-inch) work well for cleaning dirty collectors, injector ports, and detector ports. The surface brush can be used to remove residue that builds up on metal detector jets and electronic contacts.

製品情報を見る

Open-End Wrenches

High-quality wrenches for tightening capillary fittings.

製品情報を見る

4" Tapered Needle Files

These files can be used for many purposes. They are especially useful for removing ferrules that are lodged in injector or detector ports.

製品情報を見る

Mini Hand Drill Set

Drill ferrules to the proper ID in seconds! Includes three drills, for use with 0.25, 0.32, and 0.53 mm ID (0.4, 0.5, and 0.8 mm OD) capillary columns.

製品情報を見る

Soft-Side Storage Case

for Restek ProFLOW 6000 Electronic Flowmeter or Leak Detector

Inlet Maintenance Kit

Agilent GC用

  • Includes the most common consumable GC supplies and tools.
  • All parts meet or exceed performance of instrument manufacturer’s parts.
  • Parts list makes reordering easy.

製品情報を見る

Soap Film Bubble Flowmeter

  • 1 mL flowmeter for flows between 0.1 and 10 cc/min.
  • 50 mL flowmeter for flows between 10 and 300 cc/min.
  • Includes a reservoir bulb, twenty-four inches (60 cm) of 1/4-inch ID tubing, adaptor tubes for 1/8-inch tubing and 0.53 mm ID capillary columns, and Velcro fasteners.

製品情報を見る